주요 콘텐츠로 건너뛰기

4세대 iPhone. 수리는 간단하지만 앞면 유리와 LCD를 하나의 유닛으로 교체해야 합니다. GSM / 8, 16 또는 32GB 용량 / Model A1332 / 검정 또는 흰색.

2375 질문 전체 보기

Screen lights up but no picture, phone works but screen is black

Had a broken home button which I've just replaced today but after reassembly the phone appears to be dead when power button is pressed.

It will eventually start and the screen goes from being completely black to a lit up black when home or the power button is pressed, its recognized by iTunes and will sync so all seems to be working fine except the screen.

any ideas what the problem may be?

or have I broken the screen accidentally during repair

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 4
댓글 달기

답변 3개

가장 유용한 답변

try holding the power and home button for 10 seconds to force your phone to restart. if that doesn't fix it then open the phone up again and check under the wifi antenna and make sure the data cable for the display is securely pressed down. if it is then you damaged the display and need to replace it.

해당 답변은 도움이 되었습니까?

점수 3

댓글 1개:

Tried holding home and power, still no difference, will fully take apart and reassemble again and see if I have any luck.

Thanks for the reply

댓글 달기

Sorry to be the one with the bad news Zeruel but your going to need a new front screen assembly, you either flexed your LCD while prying it from the mid frame and damaged it or damaged your LCD-Digitizer ribbon cables assembling it, its real easy to do, good luck.

해당 답변은 도움이 되었습니까?

점수 3
댓글 달기

Mitch: I’m having the same issue, despite getting a new screen. Is it possible the screen is faulty/I damaged it during installation? Or could it be the connection point with the rest of the phone?

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Zeruel 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 9

30일 전: 45

전체 시간: 32,256