Hold switch doesn't works

Question

iPod 4th Generation or Photo

Model A1059 or A1099 / 20, 40, or 60 GB hard drive / touch sensitive click wheel

227 질문 전체 보기

rogerangela @rogerangela

평판: 11

1

게시일: 2010년 3월 25일

옵션

Hold switch doesn't works

Since I replaced the broken hard disk, my iPod is locked and shows the padlock icon on the screen. It works connected on the computer and the car adapter, but obviously the clik wheel doesn't responds. I've tried all the common recomendations -reboot, restore, upgrade firmware- and nothing happens.

I replaced the headphone jack cable -which had broken when changed the disk- and today I tried to fix it changing the headphone jack and headphone jack bracket. Same results.

I have a new iPod Touch but I want to preserve the old one because I usually use in the car. I can hear my music, but imagine the situation: only one option, reproduce the songs in alphabetically, from a to z!

Can someone help me?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 1개

Thanks Wes for your answer, but I think that's not my situation. I put again the headphone cable and nothing happens.

But I observed something courious: the central button turns on the iPod also with the hold switch in the locked position. But still locked with the padlock on the screen...

rogerangela 의 2010년 4월 9일

댓글 달기

답변 1개

선택된 답변

Wes @wes6099

평판: 43

3

1

게시일: 2010년 3월 28일

옵션

Hi, I had a situation similar to yours. I purchased an 4th generation photo iPod from an individual that was "stuck" in the

lock position on the LED screen. I openned it up and found that the headphone cable has been put back up-side down,(not backwards).

I flipped in over and the lock worked perfectly. I don't know

if this is your situation but it worked for me. Good Luck.

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 1개:

Perfect. My headphone plug was just loose after I put a new battery in. I took the case off, re-plugged it in and the "lock" icon went away. Works perfect now. Thank you!

Tia Rupe 의 2017년 11월 24일

댓글 달기

Thanks Wes for your answer, but I think that's not my situation. I put again the headphone cable and nothing happens.

But I observed something courious: the central button turns on the iPod also with the hold switch in the locked position. But still locked with the padlock on the screen... — rogerangela
Perfect. My headphone plug was just loose after I put a new battery in. I took the case off, re-plugged it in and the "lock" icon went away. Works perfect now. Thank you! — Tia Rupe

iPod 4th Generation or Photo

Hold switch doesn't works

답변 1개

귀하의 답변을 추가하세요