주요 콘텐츠로 건너뛰기

모델 A1312 / Mid 2010 / 3.2 GHz Core i3 또는 2.8 & 3.6 GHz Core i5 또는 2.93 GHz Core i7, ID iMac11,3

382 질문 전체 보기

Replacing the video synchronisation cable

Hello,

Unfortunatly while tearing down my new iMac (to change the Internal HardDrive) something went wrong (%&#* clumsiness lol) and the 4 pin synchronisation video cable was scratched (which link the 27" screen and the board to left of the alimentation unit).

Does anyone know where I can find some replacement cable ? I've looked everywhere unsuccessfully :-(

Thanks a lot for any response !

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
댓글 1개

Thanks for your response.. i've looked on the apple site and call a tech center. Unfortunatly degradations due to bad manutention break the warranty as i supposed :-(

I've managed to "fix" the cable but a new one would not be luxury lol

Here again, any clue would be very helpfull, thanks !

댓글 달기

답변 4개

선택된 답변

This machine was still under warranty. Parts will be very hard to find as it is so new. It might still be covered if it was in the original condition.

해당 답변은 도움이 되었습니까?

점수 2
댓글 달기

Apple's part number for the VSYNC cable for this model is 922-9161, hope this helps.

Chris

해당 답변은 도움이 되었습니까?

점수 2
댓글 달기

I "googled" it but no relevant result :-( I'll keep the part N° however and thanks for the intell ;-)

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기

Applecomponents 64NE FARRAGUT ST. PORTLAND OR. 97211-2206 . I purchased this cable from them.Best of luck!

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

fpeliss 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 2,122