주요 콘텐츠로 건너뛰기

2세대 iPhone. Model A1241 / 8 또는 16GB 용량 / 검정 또는 흰색 플라스틱 뒷면. 첫 번째 iPhone보다 수리는 더 간단하며 스크루드라이버, 비집는 도구 그리고 흡입 도구가 필요합니다.

1158 질문 전체 보기

Do I need a whole new front assembly or just a new screen?

I dropped my iPhone 3G on cement and got the spider cracks emanating from one corner. The touch screen does not work, however when I plug it into a usb port, I get a totally white screen. Should I order JUST the screen replacement or the entire assembly? I do not want to replace the screen only to find out I have to remove it again and replace the digitizer as well, however, 70 bucks is 70 bucks....

- Ryan

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
댓글 달기

답변 2개

선택된 답변

Best Bet: Replace Display Assembly

I suggest you replace the entire display assembly with a new one from Ifixit; part IF137-008-1. It is quick and pretty easy to replace. Just replacing the screen and digitizer is doable but very difficult and time consuming. If you want the phone back in operation quickly replacing the display assembly is the way to do it.

Please note that I'm not yet an experienced small device repair technician. What you read above is just my opinion. I'm basing it on attempting to replace the screen and digitizer of an iPhone 3G for a friend with parts from a different source, and failing. Then I ordered the display assembly and that worked out great. The friend is happily iPhoning. It was gratifying to see it all work so fast. --Bob

해당 답변은 도움이 되었습니까?

점수 2

댓글 1개:

Thanks for the feedback. I just ordered the whole display assembly.

댓글 달기

Received the Assembly VERY quickly and just installed it. It is charging as I type this and it looks like all is well thanks @cochranb and thanks @ifixit!

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

rcfuller 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 2,498