iPhone not working, screen tabs broken and it doesnt come on

Question

iPhone 3GS

처리 속도가 빨라진 iPhone 3G 개선 버전. 이 기기의 수리는 3G와 유사하며 간단한 스크루드라이버, 비집는 도구가 필요합니다. 모델 A1303 / 16GB 또는 32GB 용량 / 검정 또는 흰색 플라스틱 뒷면.

1500 질문 전체 보기

질문 마감됨

Meghan Locke @meghanlocke

평판: 1

게시일: 2013년 2월 12일

옵션

iPhone not working, screen tabs broken and it doesnt come on

I replaced the battery which seemed to work but then the tabs 1 and 2 fell off that were attached to the screen. So we used metal tape and electrical tape to try and put them back because soldering wasn't sticking. now it doesnt turn on and tab number 7 wont stay down! The main machine seems to work tho, it starting making the same sound as when I received emails but the screen doesn't work, Is this junk or can I fix it?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 달기

답변 1개

선택된 답변

oldturkey03 @oldturkey03

평판: 782.2k

1.1k

893

2.3k

게시일: 2013년 2월 12일

옵션

Meghan Locke, when you say " tabs 1 and 2 fell off" I suppose you mean connector 1 and 2, #1 is for the LCD and #2 is for the touch screen. #7 is for the antenna. Now when you say you tried to solder but it would not stick, I assume you are talking about soldering the connector back to the logic board. Unless you have the right tools and the experience, this is a very difficult task. Sticking it on the board with tape is not going to accomplish this. It will not make any contact with the board. I strongly suggest that you find somebody locally who is equipped to solder those connectors back on the board. Hope this helps, good luck.

해당 답변은 도움이 되었습니까?

예 아니요

점수 3

댓글 2개:

Thanks, Its usually very expensive tho so I was trying to figure something out, but I realize now that I need to get it professionally done, thanks for your help

Meghan Locke 의 2013년 2월 12일

Best of luck to you...

oldturkey03 의 2013년 2월 12일

댓글 달기

Thanks, Its usually very expensive tho so I was trying to figure something out, but I realize now that I need to get it professionally done, thanks for your help — Meghan Locke