Skip to main content

Model A1288 / 8, 16, or 32 GB capacity

586 질문 전체 보기

Replaced digitizer, touch still not working

Alright so I'm relatively experienced at fixing iDevices, but I'm not sure what to do at this point. I got a 2nd Gen iPod Touch from someone a couple years back for cheap because the digitizer was broken, so I replaced it and it worked fine. So I gave it to my brother, and he broke the screen, and for this past Christmas his gift was a screen replacement. It worked great for about a week, and then the touch wouldn't work. So I was thinking the cable came loose, and I took it apart, and as best I could tell it was just fine. After tinkering with it I noticed that the cable was torn - I think I must have torn it without noticing. So I just bought a new one off of eBay, and that digitizer won't work on this iPod either. So if it isn't the digitizer, and on a quick inspection the connector on the logic board looks fine, what could it be? Any guesses or suggestions?

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0

댓글:

As of this point I haven't made any progress. Any ideas?

의 답변

의견 추가하세요

아이폰 배터리 수리 키트

Only $29.99

Buy Now

아이폰 배터리 수리 키트

Only $29.99

Buy Now

1개의 답변

선택된 해법

If the touch does not work despite a new digitizer and the connector is okay, no bend broken or corroded pins, the only other thing should be the touch IC I believe that the iPod 2 uses the same as the iPhone. No a who;e lot of schematics or diagrams out for the iPod....

해당 답변은 도움이 되었습니까?

점수 1
의견 추가하세요

귀하의 답변을 추가하십시오

fryarludwig 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 1

전체 시간: 649