I dropped my phone in water, and now my backlight doesn't work. I heard that I should replace the backlight on my phone, but even if I buy the backlight IC or coil thing, I don't know how to install it. Do I need to know how to solder? Or is there someone that I can be referred to that can install it for me for cheap? Thanks.
좋은 질문 입니까?
평판: 9.3k
15
7
6
Hi Colton,
There might still be water in your iPhone. Therefore, I would first open the iPhone, would remove the motherboard and soak it in isopropyl alcohol (90%). Also, clean it carefully with a small brush, also the LCD/digitizer unit. Let everything dry for a couple of days before you put it back together. Then see, if the backlight is still bad. For disassembling it, follow this guide: iPhone 4 Logic Board Replacement
In case the backlight is still bad, here is what you might end up needing:
http://www.ebay.com/itm/IPhone-4-backlig...
You need to desolder the coil and (possibly) the IC on the motherboard. If you are skilled in soldering, I would try it. If not, I would look for a place where you live that is able to fix it.
I hope this helps.
Steffen
해당 답변은 도움이 되었습니까?
24 시간 전: 0
7일 전: 0
30일 전: 0
전체 시간: 539
