I replaced the topcase and now battery will not accept a charge. Works fine while plugged into outlet. Magsafe does not light up unless I plug into another MBP prior to connecting it to the repaired one, and only lights up for a few seconds. Ive reset the SMC and checked battery status, says in good condition.
Prior to replacing topcase battery was fine.
좋은 질문 입니까?
평판: 116.3k
66
68
359
Double check that connector, and the cable for proper fit/damage. Many times people damage connectors tearing them from the logic board, or, think that they have a good connection when it isn't completely square or "clicked" in.
해당 답변은 도움이 되었습니까?
Thanks for the reply, but no luck. Works fine when plugged into outlet. Nice desktop huh?
평판: 685.3k
3.4k
1.1k
2.6k
Download and run Coconut Battery and let us know your results. I suspect your MagSafe board or your connection from the MagSafe board to the logic board. http://www.coconut-flavour.com
해당 답변은 도움이 되었습니까?
I installed the battery into another MBP to fully charge & reinstalled into defective one.
Current charge 4965 mAh
Maximum charge 4992 mAh
99%
Current capacity 4992 mAh
Design capacity 5770 mAh
87%
Mac Model MacBookPro 7,1
Age of your Mac 28 months
Battery load cycles 393
Battery temperature 29.4C
Battery power usage -0.0 Watt plugged to AC
Battery power usage 3.6 Watt
Replaced DC board..still no dice.
24 시간 전: 0
7일 전: 0
30일 전: 0
전체 시간: 267
