주요 콘텐츠로 건너뛰기

모델 번호 A1238 / 80, 120, 또는160GB 하드 드라이브 / 검정색 또는 은색 금속 외형

900 질문 전체 보기
질문 마감됨

Replaced battery on iPod Classic, Turns on but doesn't charge or sync

My iPod classic dint turn on or charge, so I replaced the battery. Now it turns on with the charge left in the new battery, but doesn't charge.

I tried in wall adapter and computer both dint work.

I also ran diagnostic mode and couldnt pass the USB_Detect test.

Please help me out !!

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

선택된 답변

Rack, "couldnt pass the USB_Detect test." check the dock connector on your iPod. make sure there are no bend, broken or corroded pins. Also, try a different cable. The other issue with this model is the battery connector on the logic board. It does have a tendency of disconnecting from the board and eventually to break off. Hope this helps, good luck.

해당 답변은 도움이 되었습니까?

점수 1

댓글 2개:

Thanks for the suggestion,

The cable is good, it works fine with my iPhone.

I see some discolor in the pins.

Is it easier to replace the dock connector port by myself, I don't really find self install-steps on the internet.

No, it is a royal pain. It requires fine soldering of 30 contacts plus two anchors. Then it is also a chore to find a replacement (I harvested from an old board) and to resolder it. It takes patience, the right tools and practice.

댓글 달기
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 421