주요 콘텐츠로 건너뛰기

일반적으로 수리 또는 제작과 같은 지정된 작업을 수행하는 도구의 포괄적 수리 정보 세트입니다.

2185 질문 전체 보기
질문 마감됨

I've had to deal with recessed screws while disassembling a laptop

I am going to purchase either the Home tech Toolkit or Pro Tech Toolkit (depending on finances) soon.

I also need a small assortment of philips-head screwdrivers that can hold a screw upright while putting it into a recessed place -- way too deep to hold on with my fingers. Enough room for the screw to fall over, but not enough room to put tweezers in with the screwdriver.

It doesn't look like either toolkit has these, and I can't imagine that you don't sell them. Please point me to the right product.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

선택된 답변

Hi Maggie, thanks for your question! The bit kits included in the [연계 제품이 누락 또는 비활성화 됨: IF145-047] and [연계 제품이 누락 또는 비활성화 됨: IF145-072] each contain a 60 mm driver extension that may allow you to reach into recessed screw holes.

However, in some cases this isn't thin enough—for those situations you'll need a fixed driver. We sell these for every Phillips size, that can be magnetized to hold onto screws. For laptops I'd recommend a Phillips #1 and Phillips #0. For really small recessed screws, you'll need a Phillips #00.

Phillips #0 Screwdriver 이미지

상품

Phillips #0 Screwdriver

$5.49

Phillips #00 Screwdriver 이미지

상품

Phillips #00 Screwdriver

$5.49

Phillips #1 Screwdriver 이미지

상품

Phillips #1 Screwdriver

$5.49

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 1,225