주요 콘텐츠로 건너뛰기

5세대 iPhone. 수리는 간단하며 스크루드라이버, 비집는 도구 그리고 인내가 필요합니다. GSM/CDMA / 16, 32, 또는 64 GB / 검정색 또는 흰색.

2189 질문 전체 보기

The new display is lit, but its blank

I ordered a iPhone 4s replacement display and followed the guide for replacement successfully. When I turned on the phone again, the screen lit, but it was blank. I did receive phone calls and it seemed to be working.

I tried hard reset with Power and home button depressed. It didn't work. I disassembled AGAIN and checked all connections for looseness or damage. No problems seen.

There does appear to be a 1/2" slightly gray line running vertically in the center of display. I could swipe to shutdown phone (blind) and answer the phone with a bottom swipe of the screen (also blind). The screen is definitely lit too. The new display literally went from the bag to the iPhone, so I didn't "over handle" it. Could the screen from iFixit be bad?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 -1
댓글 달기

답변 1개

선택된 답변

It is possible that the screen is defective. We test every single item that we sell but we have a few "roque" products that decide to misbehave once they have reached the customer.

Go ahead and email support [at] ifixit.com so that we can take care of you.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

gsydnor 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 202