주요 콘텐츠로 건너뛰기

The HP Pavilion dv2000 Notebook PC is an entertainment based PC produced in 2007.

23 질문 전체 보기
질문 마감됨

My computer displays "Failed to create E:\sdv.flg error" what to do?

I tried to reboot my computer and when I used the first install disk from HP, after about 4% of it being complete a message pops up saying "Failed to create E:\sdv.flg error". I was wondering what the issue is and how to fix it. The computer is less than a year old and tech support was no help from HP. I was on hold while they tried to figure out what was happening for 45mins and came up with nothing

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

It sounds like you are trying to restore the operating system from the restore cd. Is this correct?

Possible cause of failure durring the OS restore could be a scratched or dirty cd, bad RAM or bad hard drive.

Double check the CD that it is clean and has no scratches.

To test for bad RAM and hard drive I believe there is a test inside the BIOS, which you can access by pressing the proper key right after turning on the computer.

If there isn't a tool to test RAM and hard drive in the BIOS, if you have access to another computer, you can find download and burn the Ultimate Boot CD, which has a RAM (Memory) test, and hard drive test.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 482