주요 콘텐츠로 건너뛰기

Model No. A1367 / 8, 16, 32, or 64 GB capacity

913 질문 전체 보기
질문 마감됨

Why home Button unresponsive after I replaced the ribbon cable?

I bought the home button ribbon cable to replace it on My itouch 4th gen. I followed the directions exactly like I was supposed to but when I turned it back on the home button sill didn't work. It clicks like it's supposed to but it is not responding. What did I do wrong?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

Maybe you've broken the ribbon cable connector, it is very VERY frail.

But before you change it, it was working sometimes or not?

해당 답변은 도움이 되었습니까?

점수 0

댓글 2개:

It didn't work at all. The silver button on the old ribbon cable was completely gone. It felt as if it was jammed.

Sorry but i noticed only now that you are repairing an ipod, and not an iphone.

You may have done 2 mistake.

1-You haven't fitted fine the ribbon on the steel mid plane, or you haven't placed fine the mid plant on the ipod.

2-You have broken or you have dirtied the contact.

Maybe you could also have fitted a broken parts but it is very unsual. Unmount the device, try the button with a tester and when reassembling take more attention to put the ribbon in correct position, and clean the contact between the ribbon cable and the logic board.

댓글 달기
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 85