평판: 88.7k
190
259
144
I just got this printer and I did get it going, and it's a nice printer, except one feature I never liked on these HP color lasers, and want off
Color calibration if this unit is idle
It wastes toner, and makes toner go faster, so I want it off
Is there a way to do this? I also have it set to ignore the cartridge levels and I can decide if a toner is low or empty, not the printer
좋은 질문 입니까?
평판: 59
3
1
Hi nick,
Unfortunately calibration can't be turned off from what I know, but you can change a setting so it only does a calibration every so often, depending on the model of your printer depending settings that you can change it to.
Have a look through your printer settings for *Calibration Timing* and see if you can change it to a different time, for example once a week.
Hope this helps.
Thanks Jordan.
해당 답변은 도움이 되었습니까?
Try this also for empty cardriges:
There is an override in the menu. So open the Menu; Configure Device; System Setup; Replace Supplies (down arrow 9 times); Override at Out.
해당 답변은 도움이 되었습니까?
24 시간 전: 0
7일 전: 1
30일 전: 12
전체 시간: 11,455
