주요 콘텐츠로 건너뛰기

2012년 6월 출시 / Core i7 프로세서 Turbo Boost 포함 / 최대 1 GB DDR5 비디오 RAM

596 질문 전체 보기

2011 vs 2012 MacBook Pro Bottom Case Same

I recently purchased a new bottom case for my Mid-2012 MacBook Pro. After taking off my current bottom case and comparing it the replacement, I noticed there was some differences in the black foam-like material attached to the bottom.

On the one that came with the machine, there is a cutout and extra layer of foam under the RAM where as the replacement doesn't have this.

My question is: are there two different parts? Does the extra foam matter? If they are different, where would I go about getting a mid-2012 bottom case?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 -1
댓글 달기

답변 1개

선택된 답변

Yes there are different bottoms. Yes the cutouts make a difference (they are for insulation/vibration dampening and fan clearance). If you can not transfer or manufacture a similar material the best would be return the defective part to your vendor for a replacement.

If this Answer is helpful please remember to return and mark it Accepted.

해당 답변은 도움이 되었습니까?

점수 1

댓글 2개:

Wish I could post pictures to show how minor the differences are. I'm talking about a 1mm extra piece of foam above the RAM. This is the only difference. Fan cutouts, etc. are the same.

In any case, the above answer isn't that helpful. If there are different bottoms, where can you find a mid-2012 bottom case. I have searched everywhere for this part and it doesn't seem to exist.

In fact, just like everyone else, iFixit sells the same replacement bottom case for the 2011 and 2012 models. Do they have it wrong?

Shoot iFixIt sales an email or give them a call. This is an open forum supported by volunteers. With that said, we don't deal with replacing bottom covers that often.

댓글 달기

귀하의 답변을 추가하세요

philwgreen 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 479