Allan Jones responded to my inquiry on Apple support community post on 5/4/13.
I am located near Madison, WI. He suggested finding someone who could solder the connector to the board. Any suggestions?
좋은 질문 입니까?
평판: 685.2k
3.4k
1.1k
2.6k
First read through this guide: Soldering Skills
Next order this:
and this:
[연계 제품이 누락 또는 비활성화 됨: IF145-018]
Never pay for soldering again.
해당 답변은 도움이 되었습니까?
Also get: fine point replacement tips, desoldering braid and some practice boards (you'll want a lot) it's easy to burn up the board & traces. (See why I said it might be smarter to pay someone to do this?)
평판: 116.3k
66
68
359
Use the yellow pages or google for electronics repair shop. Soldering component boards (and disassembly of that sonic sealed uint) is not an easy DIY project.
Good Luck
If this Answer is helpful please remember to return and mark it Accepted.
해당 답변은 도움이 되었습니까?
24 시간 전: 0
7일 전: 0
30일 전: 0
전체 시간: 468
