주요 콘텐츠로 건너뛰기

Second generation of Wi-Fi iPad, released on March 11, 2011. Model number A1395. Repair is difficult and will require heat.

250 질문 전체 보기

How can I ensure the microphone is properly re-adhered in place?

I'm repairing the microphone part in this iPad 2. It was damaged by moisture a month ago and doesn't function properly. So, I elected to open the iPad and replace the part.

I've performed the steps necessary to open the iPad, however, I'm finding upon replacing the part that the factory adhesive foam around the front camera assembly won't do as well as before. Since this repair requires removing the camera/headphone jack assembly, some of the cables and foam are not adherent enough to my liking. Is there some product I can use to ensure the microphone, front camera, and LCD are properly seated with new adhesive?

I have the adhesive strips for the glass, but there isn't anything in the set to use on the other parts in my repair.

Thanks,

Paul

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 -1
댓글 달기

답변 1개

선택된 답변

just use a little bit of glue

해당 답변은 도움이 되었습니까?

점수 0

댓글 1개:

Any suggestions on a specific kind? What would I buy?

댓글 달기

귀하의 답변을 추가하세요

Paul Sunderhaus 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 110