주요 콘텐츠로 건너뛰기

4세대 iPhone. 수리는 간단하지만 앞면 유리와 LCD를 하나의 유닛으로 교체해야 합니다. GSM / 8, 16 또는 32GB 용량 / Model A1332 / 검정 또는 흰색.

2375 질문 전체 보기

At&T iPhone only Boots to Apple Logo...

Hello All,

So I replaced the screen to an AT&T iPhone 4 and the phone will only go as far as booting up to the Apple Logo and does not do anything else... The Apple logo stays on for about 30 seconds, the screen goes black and then the Apple logo comes back on for about another 30 seconds and continues this process....

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 2
댓글 2개

Thanks Con... It was a friends' sons' phone I was fixing which he tried doing himself... The battery was definitely the issue... Thanks...

rayrod354, if the answer from con helped you to resolve your issue, all you would have left, is to accept it as the most appropriate answer. That way anybody that has the same problem as you did, will know what works. Great job.

댓글 달기

답변 2개

선택된 답변

I think you have damaged the battery during the install.

Try another battery and see if that sorts it

해당 답변은 도움이 되었습니까?

점수 2

댓글 1개:

Thanks Con... It was a friends' sons' phone I was fixing which he tried doing himself... The battery was definitely the issue... Thanks...

댓글 달기

discconect your phone from the computer, wait for it to power off again, then hold the home button down and plug it in, hold the home button until itunes asks for a restore, then let me know how it goes, I have this problem with a 4, might be the battery or a loose connection are my suspects so far, Keep on rocking in the free world.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

rayrod354 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 487