주요 콘텐츠로 건너뛰기

처리 속도가 빨라진 iPhone 3G 개선 버전. 이 기기의 수리는 3G와 유사하며 간단한 스크루드라이버, 비집는 도구가 필요합니다. 모델 A1303 / 16GB 또는 32GB 용량 / 검정 또는 흰색 플라스틱 뒷면.

1500 질문 전체 보기

Don't Know where this part (metal cover) belongs?

Hello,

Ich changed the battery of my device yesterday, after opening the device and removing the logic board this metal cover fell right out of the phone.

[IMG]http://imageshack.us/a/img542/1772/78er....[/IMG]

Block Image

[IMG]http://imageshack.us/a/img837/6051/yoap....[/IMG]

Block Image

I think it must have been loose before, because i was able to hear something rattling, when I shakes the phone.

After the battery change, I know have the issue, that I don´t get any WiFi reception.

I do not know where this cover belongs, so I am asking you for help.

thanks from Germany

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
댓글 1개

Ok, thanks

Do you know if it is important for WIFI reception?

댓글 달기

답변 2개

가장 유용한 답변

its a cover from the back side of the main board

Block Image

you can see it on the top

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기

From looking at this picture. it seems to be a cover. Maybe where i circled will be the location it goes. Seems to match the irregular cut.

Block Image

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Maximilian 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 119