평판: 1
2
How can I clone from one laptop to another? I have plugged the firewire cable into both laptops & the yellow Y comes on the one laptop when I hold down the "T" key, but the icon for the firewire does not show up on the laptop that I want to clone. Or the source hard drive. When I open "Disk Utility" it is in there but I can't do anything with it. It won't move.
좋은 질문 입니까?
평판: 355
5
4
Based on your question, make sure you are doing the following: 1) The target computer is powered off and the firewire is connecting the computers. 2) Immediately when you press the power key on the target computer press and hold the t until the display of the target shows the firewire icon.
See this article for details on some issues relevant to problems with starting up in target mode: http://support.apple.com/kb/ht1661
Does the target computer have an OS installed?
해당 답변은 도움이 되었습니까?
평판: 116.3k
66
68
359
Format or partition the destination disk with Disk Utility - then use RESTORE to clone the OS from the good book to the other drive.
If this answer is acceptable please return and mark it.
Good Luck,
N.
해당 답변은 도움이 되었습니까?
24 시간 전: 0
7일 전: 0
30일 전: 0
전체 시간: 1,653
