Snapped blue and red cable, how to repair?

Hi there

I have mistakenly snapped the wires of the speaker blue and red I know how to solder them however the size of my blue wire only reaches the closest point to the soldering tip and the red one reaches furtherest away soldering tip.

If this is normal that the blue wire is smaller than the red then could you please tell me which solder point it goes to on the Logic Board? (closest / further) and (on top of the board or underneath it)?

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

1개의 답변

선택된 해법

I'd just get a length of insulated wire (modelling wire is the best match) and cut it to your required length instead of messing about trying to fit a short wire.

해당 답변은 도움이 되었습니까?

점수 1


check out this iPod Touch 4th Generation Teardown toward the end of the guide is a pic of the underneath of the board with the attachments of your wires.

의 답변

의견 추가하세요

귀하의 답변을 추가하십시오

Shahbaz 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 281