옵션

Were to solder wireless antenna connector?

Hello,

I have an automotive DVR installed on my car.

As you can see on the picture, it has a space for a wireless antenna adapter.

https://www.dropbox.com/s/u912tilpwba8t5...

Unfortunately i have no electronic skills and need some help to figure-out where should I solder this connector into the communication board of my device (See pictures of the board).

https://www.dropbox.com/s/faml6djb3uejy0...

https://www.dropbox.com/s/8tfd4u0wmga1dw...

https://www.dropbox.com/s/igssuyxj6f90to...

I would appreciate very much if someone could help me.

Thanks

Sylvio

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 -1

댓글 2개

This question was migrated from http://meta.ifixit.com/Answers.

iRobot 의 2013년 8월 7일

Can you give us the make & model of your DVR unit

Dan 의 2013년 8월 7일

댓글 달기

게시일: 2013년 8월 7일

옵션

If you can identify the make & model 1st try to contact them to see if they have an upgrade kit. If not see if you can find out what WiFi PC Card they used on the higher end sister model that will be the unit you will need to get. You won't be able to use anything else as the firmware in the unit will expect this explicit WiFi unit.

Most likely you will also need a firmware update to make it work as well.

해당 답변은 도움이 되었습니까?

예 아니요

점수 0

댓글 달기

자동차 액세서리/자동차용품

Were to solder wireless antenna connector?

답변 1개

귀하의 답변을 추가하세요