주요 콘텐츠로 건너뛰기

모델 A1046 또는 A1095 / 1280x854 스크린 해상도

118 질문 전체 보기

PowerBook g4 15 flashes white lines horizontally in the middle of lcd

I purchased this powerbook not to long ago on ebay listed as for parts I have managed to repair everything except the horizontal white flashing lines that come and go. I don't think its the logic board or GPU because when i connect it to external monitor no lines. I would be very happy if someone helped me out here please. I included a picture so you could see what it is I also replaced the lcd data cable but that didn't fix the issue

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 -1
댓글 달기

답변 1개

선택된 답변

You are correct the problem is not on the logic board but within the LCD panel its self. One of these possibilities is the cause:

  • The LCD driver logic on the back side of the LCD has a bad solder joint
  • The binding of the kapton flex circuit to the LCD has broken free
  • The LCD back glass has a crack in it

In any case you'll need a new LCD screen to fix it.

해당 답변은 도움이 되었습니까?

점수 1

댓글 3개:

Hello recently I came across a fix on the internet that didn't involve purchasing an LCD I tried it and it solved this issue. None of the problems you listed were mine, what had happen to mine was a ribbon cable that transmits light and image across the whole LCD was loose. These cables aren't soldered but glued and the glue wore off. They were loose, all I did was tape them back tightly and I had a perfectly brand new screen. Thanks for your info and help though.

I did put it in "The binding of the kapton flex circuit to the LCD has broken free" ;-{ Sorry I wasn't clear enough. In any case can you accept the answer - thanks!

Thanks for this and I will replace the screen and get back to you to tell you I if it worked, I kinda suspected that it was the lcd but I wanted to be sure.

댓글 달기

귀하의 답변을 추가하세요

Valiera 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 165