주요 콘텐츠로 건너뛰기

Repair information for the 4th generation iPad. Released November 2, 2012. Model numbers: A1458, A1459, and A1460.

394 질문 전체 보기

Homebutton assembly differences throughout iPad generations

Hi guys!

I was just wondering:

I know that the iPad 4 comes with a new flexcable which is easy to be damaged during the process of removing the touch assembly.

As far as I know, the assembly consists of:

-the physical homebutton

-the mounting bracket

-the hold-thingy which will be glued to the touch assembly

-the flex cable

Since the main difference is the new flex cable, my question is:

Are the other parts of the assembly the same/compatible throughout the generations 2,3 and 4?

So could I use the same physical homebutton in an iPad 4 aswell as in an iPad 2?

Same thing for the mounting bracket and the hold-thingy (sorry for the unprecise description, English is not my mother tongue)

Thanks for your help!

Regards from Germany,

Jonas

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 -1
의견 추가하세요

답변 1개

선택된 해법

The electronic switch is the same for Gen 2 and 3. I'd say that all three of the current generations share the same adhered mounting brackets and home buttons. Only the 4 uses a ribbon because the new port isn't "wide" enough to contact previous Gen electronic switches.

해당 답변은 도움이 되었습니까?

점수 1

댓글:

Thank you very much!

That's what I thought, thanks for the confirmation.

Had to configure a homebutton assembly for my repair shop and wasn't quite sure, got confused because the homebuttons of 2-4 seemed to be same though they had different numbers on their backs.

의견 추가하세요

귀하의 답변을 추가하십시오

Jonas 가/이 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 84