Model M2453 or M6411 / 300, 366, or 466 MHz G3 processor

73 질문 전체 보기

Stripped display screw, can't find parts, any suggestions?

I recently replaced the hard drive and LCD in my Tangerine Clamshell. I've refurbished at least 6 or 7 different clamshells and I guess I was just moving to fast and stripped the right display anchor screw, I'm not even sure what to replace. I've looked through lots of parts. I really don't want to scrap this machine, I bought it brand spanking new. Anyone have any ideas?

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

1개의 답변

선택된 해법

Hardware and auto stores often sell "thread chasers" that can clean/recut a stripped thread (don't know how small they go).

Helicoil inserts also fix mugged up threads. (same sources) same size proviso.

There's recutting it one size up, and the ever popular super glue, bondo, expoxy glue.

If this Answer is helpful please remember to return and mark it Accepted.

해당 답변은 도움이 되었습니까?

점수 1
의견 추가하세요

귀하의 답변을 추가하십시오

Samuel Osborne 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 65