기기를 수리하세요 커뮤니티 상점

2012년 9월 12일에 발표된 여섯 번째 Apple iPhone입니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 16, 32, 또는 64GB / 검정색 또는 흰색으로 제공하였습니다.

2522 질문 전체 보기

옵션

Home Button Clicks but doesn't work- ripped rubber

I replaced my screen by following the guide on iFixit. Everything worked perfectly except now my home button doesn't work. It clicks normally, but has no response on the phone. When I was replacing the screen, the rubber edge of one side of the button ripped off. The guide said explicitly to make sure this doesn't happen, but it was a really small part of the rubber. Is that little bit of rubber that tore off causing this problem?

Should I order a new button and replace my current one?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 -1
댓글 달기

답변 3개

필터:
가장 유용함 가장 최근 가장 오래된
선택된 답변

옵션

First go in and check the slot where the button locks into place on the inside of the phone.

Use the ifix guide for that model of phone to walk you to the home button replacement if you need to order a replacement flex cable there only a buck or two on ebay

해당 답변은 도움이 되었습니까?

예 아니요
점수 1
댓글 달기

옵션

I agree with the first answer.

I have found the home button to be notoriously unreliable on all iPhones and iPads

Cheers Paul

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

옵션

I agree with Gary, also to check the homebutton, you can disassemble the phone and bridge the homebutton receptor to see if it responds. This means having the phone on and disassembled at the same time.

On this image:

http://d3nevzfk7ii3be.cloudfront.net/igi...

Notice the two copperish things centered below the battery? Bridge those with something conductive, a screwdriver usually works and see if the phone responds. If it does replace the flex cable.

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

귀하의 답변을 추가하세요

bhkonig 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 2,184