White Screen but Boots up!

Since an external display looks normal your VGU/VGC is good, so is your logic board, and HD. That leaves the LED controller, the data display cable and the LED its self as source of the problem. I'd start with replacing the cable as that is the cheapest simplest place to begin..

If this Answer is helpful please remember to return and mark it Accepted.

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 2개:

Thanks for your response :)

Okay, I will look after that cable!

But do you really think the LED itself could be the problem? Because after all its still completely glowing in white..

Greets

Kev

Kevin Essinger 의 2013년 9월 25일

I think Machead mis-spoke, I'm sure he meant the LVDS cable you disconnect in step 8 in this guide Replacing the MacBook Pro 13" Unibody Display assembly. The connector or the cable could be damaged. It supplies power for the backlight LED's as well as sends the signals to the LCD. The other possibility here is the display got a good hit on the edge causing the driver logic mounted on the back of the panel to become dislodged. If that happened you will need a new display as thats not repairable.

Dan 의 2013년 9월 25일

댓글 달기

Thanks for your response :)

Okay, I will look after that cable!

But do you really think the LED itself could be the problem? Because after all its still completely glowing in white..

Greets

Kev — Kevin Essinger
I think Machead mis-spoke, I'm sure he meant the LVDS cable you disconnect in step 8 in this guide Replacing the MacBook Pro 13" Unibody Display assembly. The connector or the cable could be damaged. It supplies power for the backlight LED's as well as sends the signals to the LCD. The other possibility here is the display got a good hit on the edge causing the driver logic mounted on the back of the panel to become dislodged. If that happened you will need a new display as thats not repairable. — Dan

MacBook Pro 13" Unibody 2010년 중반기

White Screen but Boots up!

답변 1개

귀하의 답변을 추가하세요