주요 콘텐츠로 건너뛰기

첫 번째 iPhone 모델, Model A1203은 4, 8, 또는 16GB 용량과 알루미늄 뒷면을 가지고 있습니다. 수리를 하려면 상당한 양의 비집기와 납땜을 요구할 수 있습니다.

224 질문 전체 보기

Is there any way I can test a battery's performance?

I recently got my hands on a 1st generation iPhone that had been water damaged. Is there any way of testing the battery to see if it has any life in it? I'd rather not open mine up if the battery turns out to be pretty crappy...

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
댓글 달기

답변 1개

선택된 답변

yes - i know two ways - but both requre some kind of special hardware and are not for free

1, is a li-po charger for rc-cars(boats,planes) - those chargers are able to tell you exactly the mAh you have in a fully charged battery

2, an astratec battery tester - normally used in any nokia store - they are sometimes on ebay for around 100-150$

there are surely other ways too - but i never used other stuff than those 2 i mentioned

해당 답변은 도움이 되었습니까?

점수 2
댓글 달기

귀하의 답변을 추가하세요

Josh Calvetti 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 3,154