주요 콘텐츠로 건너뛰기

4세대 iPhone의 CDMA 버전. 수리는 간단하지만 앞면 유리와 LCD를 하나의 유닛으로 교체해야 합니다. 16 또는 32GB / Model A1349 / CDMA 호환성.

387 질문 전체 보기

None of my screws are coming off...

I'm trying to replace both my front and back screen on my phone and I've tried pretty much everything. The whole rubber band trick, super glue, etc....

All of the screws on the back aren't coming off and I don't know why. I think it's because of my screwdriver. But, I really would not like to purchase another one because I just want my phone fixed asap. I've literally tried everything and the battery screw is totally jacked up now. PLEASE HELP. And provide specific directions because I have no idea how to do this stuff...

이 질문에 답하세요 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

답변 1개

the screws on the battery? do the look stripped? I assume you used the proper size philips. sometimes if its not 100% stripped you can manage to wedge a flathead in there (keep pressure so it doesn't strip more), or if you have the right pliers you can get lucky. if the screwdriver if the right size, and none of the tricks work, you may need to try a screw extractor.

Precision Screw Extractor Set

In the future if the screws are stripping, apply a bit more downward pressure, and there is slipping, don't try unscrewing more until you can figure out why. if its the screwdriver, and you don't want to wait, I love the masterforce micro screwdrivers menards carries, the price is good too.

A good micro shot of the screws could help us out a bit more too.

Sorry I can't help more :(

Precision Screw Extractor Set 이미지

상품

Precision Screw Extractor Set

$19.99

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

귀하의 답변을 추가하십시오

Sun Min 가/이 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 297