주요 콘텐츠로 건너뛰기

Second generation of Wi-Fi iPad, released on March 11, 2011. Model number A1395. Repair is difficult and will require heat.

250 질문 전체 보기
질문 마감됨

Accelerometer stopped working after screen repair

I just replaced the glass on my iPad 2. (This was the 3rd time I've had to fix it!!) I have not noticed that the accelerometer is no longer working. The lock switch on the right is not on. I have went into settings, and nothing is changed. It just won't move. Games that require tilting the ipad no longer work either. Any suggestions to fix this? Is this something I messed up, or will a factory reset be sufficient to fix it? ( I should also mention that I DID tear my wifi antennae so I am waiting on a replacement...so I didn't want to do the factory reset just yet! )

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0

댓글 2개:

Hey Brian, did you ever fix this? I have the same issue

The problem was hardware related, unfortunately. I never physically damaged anything; I am very careful, and have done many iPad repairs, but I'm assuming I must have shorted something out. I purchased a new logic board, and it is working great now. Wish I had a better answer for you!

댓글 달기

답변 3개

Try the factory reset. Cross your fingers that it is a software issue. A hardware issue would mean some complicated maneuvering to fix it because the 6Axis is soldered to the logic board.

Also, try a soft reset if you haven't already. That is hold power and home buttons until the device resets. Don't slide anything.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

one question the accelerometer built into the iPad 2 is on the logic board?

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

Yes it's on the logic board

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 2,045