기기를 수리하세요 커뮤니티 상점

Second generation of Wi-Fi iPad, released on March 11, 2011. Model number A1395. Repair is difficult and will require heat.

250 질문 전체 보기
질문 마감됨

옵션

Endless Loop after restore

I repaired my iPad 2 with a new flex cable and new digitizer. Everything was working fine, aside from the rear facing camera not working and some issues with programs opening on their own periodically.

I decided to sell it to upgrade to an iPad 3 and selected to "Erase all content and settings" in the Reset menu. When I did so, it sent the iPad into an endless reboot loop. I've restored it through iTunes and when it was complete iTunes showed that the iPad had been restored. Despite this, the iPad continues to power cycle and hasn't stopped rebooting.

Has anyone had this issue and/or know what I can do to get it past the reboot?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

sounds like the home button could be depressed in some way. Is the body damaged? Did you put on a new bezel? If there is body damage and you put on a new digi and everything doesn't line up right it will continue to sense the pressure on the home button and send it into this cycle. I repair I pad's all day everyday for a company and have seen several issues like this due to body damage.

해당 답변은 도움이 되었습니까?

예 아니요
점수 1
댓글 달기
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 259