주요 콘텐츠로 건너뛰기

2세대 iPhone. Model A1241 / 8 또는 16GB 용량 / 검정 또는 흰색 플라스틱 뒷면. 첫 번째 iPhone보다 수리는 더 간단하며 스크루드라이버, 비집는 도구 그리고 흡입 도구가 필요합니다.

1505 질문 전체 보기

Identify part that fell out when repairing

After following the step by step instructions on replacing broken glass a small silver piece and circular part fell out. It has the letters h-f on it. Can you tell me what this is and where they belong?

It fell out right after step 6. when I disconnected ribbons 1,2,3. and removed the glass from the mother board.

Block Image

A larger view of the part.

해당 질문 답변하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0

댓글:

Post an image of your part with your question. It will make it a lot easier to identify.

의 답변

의견 추가하세요

2개의 답변

가장 유용한 답변

Hello! It is the "MIC" of iPhone 3G. Show u as below pictures.

It belongs to complete dock assembly replacement. So I think you need to replace this spare part.

Here is the replacement part , http://bit.ly/1bLJiwc . You can know more at this website.

Hope will help you.

Block Image

Block Image

Block Image

해당 답변은 도움이 되었습니까?

점수 1
의견 추가하세요

can you make the picture bigger?

해당 답변은 도움이 되었습니까?

점수 0

댓글:

also you didnt mention at whatpoint it fell out

의 답변

I cant find a place for it either, could it have come from somewhere on the broken glass screen? I would try finishing the repair as normal and seeing if it works then troubleshoot it from there. If it turns on, check all the settings and buttons and make sure they are working.

의 답변

의견 추가하세요

귀하의 답변을 추가하십시오

Jodee Hartman 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 77