주요 콘텐츠로 건너뛰기

듀얼 마이크와 802.11ac Wi-Fi 연결 기능을 갖춘 더 큰 Apple MacBook Air 노트북 입니다.

464 질문 전체 보기

Backlight doesn't work after LCD replacement.

I had a cracked LCD screen. Prior to disconnecting the LCD cables the backlight worked fine. I replaced the screen but since then the backlight doesn't work. I confirmed the backlight cable and LVDS cable are securely attached. What are the possible causes?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 -1
댓글 1개

Did u get this fixed ??

댓글 달기

답변 2개

선택된 답변

Blown fuse/controller for the backlight. This is not a DIY repair unless you work with electronic component replacement on a regular basis. Logic board soldering requires special tools, solder & lots and lots of practice.

Follow the tag at right for more information.

If this answer is acceptable please remember to return and mark it.

해당 답변은 도움이 되었습니까?

점수 1

댓글 3개:

Is there a way to confirm this visually before taking it in?

Kimberly, if you have a multimeter you could check the fuse for continuity.

Where is the fuse?? Location

댓글 달기

Check your backlight cable ... I installed mine the way the cable was positioned and best I got was black screen with faint apple symbol .....

But turns out I had it in backwards ... Was very awkward to flip cable and install bit that was it , try that just for !@#$% and giggles

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기

귀하의 답변을 추가하세요

Kimberly 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 382