Sleep Function Does Not Work

Question

MacBook Pro 15" Retina Display 2012 중반기

6MB 공유 L3 캐시 2.3GHz, 2.6GHz, 또는 2.7GHz 쿼드-코어 Intel Core i7 프로세서 (Turbo Boost 최대 3.7GHz).

561 질문 전체 보기

Duarte @duarte16324

평판: 1

1

게시일: 2013년 12월 19일

옵션

Sleep Function Does Not Work

Hey guys, basically the Mac does not sleep at all instead it just shuts itself down. For example pressing sleep on the menu and then waiting a few seconds it won't turn on, just completely shuts down so I have to press the power button to turn it back on. This also happens if I just simply close the lid.

Although when the Mac is plugged into the charger it goes into a boot loop, just keeps turning itself on and off if I close the lid or press the sleep option.

I have reset the PRAM and all those other things to no vail. Is there anything else I can do? Could it be a malfunctioning part?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 -1

댓글 달기

답변 1개

선택된 답변

originalmachead @originalmachead

평판: 116.3k

66

68

359

게시일: 2013년 12월 19일

옵션

I would try re-seatting the RAM in the machine, if it's ever been opened or dropped a cable may have been nicked or pinched and as you move the top it shorts out the machine, and stays shorted out until you open the lid and boot.

If it's had weight stacked on it, or crushed in a case or bin you may have a cracked battery, moving the lid flexes cables and expands/contracts crack. I had a MBA that had strange power behavior that was traced back to a cracked internal battery.

The other possibility is a corrupt sleep setting. Try turning off sleep mode in System Preferences.

If this answer is acceptable please remember to return and mark it.

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 1개:

Unfortunately not, this machine has never been opened at all. It's also a Retina Mac so the RAM is soldered onto the board if I'm not mistaken.

Even if the lid isn't moved or closed the problem still happens by simply putting the computer to sleep using the system menu and leaving the lid open. I could try to have a look inside the machine when I get the correct screwdriver to see if there is a problem with the battery.

Duarte 의 2013년 12월 20일

댓글 달기

Unfortunately not, this machine has never been opened at all. It's also a Retina Mac so the RAM is soldered onto the board if I'm not mistaken.

Even if the lid isn't moved or closed the problem still happens by simply putting the computer to sleep using the system menu and leaving the lid open. I could try to have a look inside the machine when I get the correct screwdriver to see if there is a problem with the battery. — Duarte

MacBook Pro 15" Retina Display 2012 중반기

Sleep Function Does Not Work

답변 1개

귀하의 답변을 추가하세요