주요 콘텐츠로 건너뛰기

4세대 iPhone. 수리는 간단하지만 앞면 유리와 LCD를 하나의 유닛으로 교체해야 합니다. GSM / 8, 16 또는 32GB 용량 / Model A1332 / 검정 또는 흰색.

2375 질문 전체 보기

Loudspeaker is not working after home button replacement

Hi,

My friends home button stopped working so I replaced it, prior to this he complained that 'one side' of the loudspeaker wasn't working. After I completed the repair there's no sound at all coming from the phone, I even replaced the loudspeaker module with a new one and reset the phone but it's still not working. Has anyone got any suggestions?

Thanks!

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 -1
댓글 달기

답변 3개

가장 유용한 답변

Try checking the iPhone with head phones, if you hear sound then it is possible that the headphone jack needs to be cleaned. Also take a look at your dock connector on the logic board and make sure they are clean.

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기

You might have to leave it into a repair centre so they can test it.. It could be possible you bought faulty parts

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기

My bet is on dock connector

해당 답변은 도움이 되었습니까?

점수 0

댓글 1개:

I have replaced the dock connector and there's still no sound. Sound can be heard when earphones are connected, the volume bar is visible and is moving up and down when the buttons are being pressed. So that's the speaker module replaced and the dock connector replaced - Could it be software?

댓글 달기

귀하의 답변을 추가하세요

tomtechie 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 59