주요 콘텐츠로 건너뛰기

5세대 iPhone. 수리는 간단하며 스크루드라이버, 비집는 도구 그리고 인내가 필요합니다. GSM/CDMA / 16, 32, 또는 64 GB / 검정색 또는 흰색.

2189 질문 전체 보기

Screen flashes but stays black after new Digitizer

Iphone 4s with cracked glass. Replaced the screen assembly and the phone flashes faintly when turned on but will not light. Plugged old screen back in and it lights just fine and everything works. Tried a second screen and same thing. Will not light.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 -1

댓글 1개:

It turns out that the phone was at version 5.11. I updated the iOS to 7.0.4 and it recognized the new screen and worked perfectly! Problem solved.

댓글 달기

답변 1개

One possible explanation is that a pin of the female socket connector tore and remained attached to the male LCD connector on old screen--new screens then can't work without that pin, but old screen would still (kind of) mate the pin and socket. Check with magnification the socket and connectors.

Jessa

해당 답변은 도움이 되었습니까?

점수 0

댓글 1개:

Unfortunately no. Nothing looks ou of place at all and there are no pins stuck in the old one. I am totally baffled. Never have had one do this. My next option is to try a full restore of the phone.

댓글 달기

귀하의 답변을 추가하세요

Chris Chandler 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 206