주요 콘텐츠로 건너뛰기

모델 A1369, 1.6, 1.7, or 1.8 GHz 프로세서, 64, 128 또는 256GB 플래시 저장공간

328 질문 전체 보기

How do I set the system serial number after replacing logic board?

I have successfully replaced the logic board and the system is running great. Is there an available tool that works to set the serial number for the logic board? It is currently the default setting, "System Serial#".

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
댓글 달기

답변 2개

선택된 답변

Generally you don't. Only Apple Technicians have access to the software to accomplish this.

If this answer is acceptable please remember to return and mark it.

해당 답변은 도움이 되었습니까?

점수 2
댓글 달기

Apple certified service technicians uses Apple netboot diagnostics called AST to serialize a newly replaced logic board. Alternately, they may boot to a blank board serializer software. I'm sure if you take it to the Apple store, they can do this for you since it would be detected that your MLB is blank and needs to be serialized when they run their diagnostics.

Where did you purchase your logic board?

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Michael Clark 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 5

30일 전: 29

전체 시간: 2,496