주요 콘텐츠로 건너뛰기

2009년 중반기 모델 A1278 / 2.26 or 2.53 GHz Core 2 Duo 프로세서 EMC 2326

745 질문 전체 보기
질문 마감됨

How do I fix the trackpad screw after it has fallen out?

I may have over tightened that actual trackpad screw, however the screw fell out and I have tried numerous ways to get it to go back in. It doesn't seem to screw in. either that or I am doing it in the wrong. Is it possible to reinstall the trackpad screw after it has fallen out?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

Hi Troy,

The trackpad screw does nothing more then a setting the right distance between the actual switch and the trackpad. You should be able to just put it back in.

However, if you overtightened it and it fell out, you probably bent some of the metal of either the screw or the screw hole.

If you look at it closely, can you tell if the threads are intact? If not, try filing them in the right shape again. But be careful, you don't want any filings ending up in your MacBook!

Good luck!

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 52