Replace GSM antennas connector
Hello
First i'm a german guy and i found nothing in the internet for my problem. Excuse me for my bad english.
The Story:
I get a iPhone 4 from a friend. She said to me that the iPhone was a present from a guy and she doesn't have signal.
So i opened the iPhone. Someone solder the antenna cable on the connector and the plastic from the connector burns into the logic board. I need 1 hour to clean this *****. So i order a new connector and there are 4 solder points. 2 big ones and 2 little ones. There are only 2 positions which make sense. But only one from this 2 little solder points are going to the middle from the connector and send the signal to the antenna. So on which position must i solder the connector? The pin with the connection to the middle shows to the accumulator or to the frame?
I hope everybody understand my english :D
best regards
Müller Michael from Germany
좋은 질문 입니까?