주요 콘텐츠로 건너뛰기

2012년 9월 12일에 발표된 여섯 번째 Apple iPhone입니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 16, 32, 또는 64GB / 검정색 또는 흰색으로 제공하였습니다.

2521 질문 전체 보기
질문 마감됨

Replace battery & Charger Port. Phone wont power on after it dies!

Hey, I am fixing a phone for a client. When I got it the phone would not power on. So I replace the battery.

The powered on fine. So I replaced the charger port as well. The phone powered on and charged fine. I thought it was fixed.

So the next day the phone died. So I went to charge it up. NOW THE PHONE WONT EVEN POWER ON AGAIN! I am stumped. Do you guys have any suggestions as to what the problem could be.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 5개

가장 유용한 답변

A new program that started about 10 days ago: Check your serial number here to see if it qualifies for the Battery Replacement Program:

https://ssl.apple.com/support/iphone5-ba...

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기

Could be the battery thats faulty or the charge port

해당 답변은 도움이 되었습니까?

점수 0

댓글 1개:

I replaced the battery and the charger point. It was working until the battery died. Now the phone wont even power when I put it in on the charger. So Now I am back at square one.

댓글 달기

Same issue here. Phone came in dead. Put in a new battery and it charges fine. However if you let the battery die it will no longer charge. Tried several known good batteries and charger ports. I read that there is a component called the U2 IC. It is a 36 pin chip. When this fails you will get the symptoms we are experiencing. Looks like a pretty advanced repair. Hoping someone else has run across an easier solution.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

affter replace charging port

phone dead

해당 답변은 도움이 되었습니까?

점수 0

댓글 1개:

what go wrong

ant advice

댓글 달기

what go wrong

any advice

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 630