Skip to main content

모델 A1181: 1.83, 2, 2.1, 2.13, 2.16, 2.2, 또는 2.4 GHz Core 2 Duo 프로세서

1474 질문 전체 보기

MacBook doesn't turn on

Hello guys!!

I removed the fan of my Macbook, cleaned it and put in the same place.

After close the Mac, and press the power button, the Mac work but don't recognized the keyboard.

I switched off the mac and press the power button again.

The macbook doesn't turn on anymore!

The magsafe adapter works fine.

I don't know that to do!

Somebody have an idea to fix it?

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
의견 추가하세요

아이폰 배터리 수리 키트

Only $29.99

Buy Now

아이폰 배터리 수리 키트

Only $29.99

Buy Now

2개의 답변

선택된 해법

Thank You for answer! After I see a video in youtube, I touch the board connectors of the keyboard with a screwdriver and the Macbook turns on!!

I think that the flat cable of the upper case is damaged. It seems very bent.

I put the connection of the upper case in the board very very times, and it doesn't work.

Can it be other thing?

Now I'm using a Wireless Keyboard, until I know exactly what I have to change in the macbook.

해당 답변은 도움이 되었습니까?

점수 0

댓글:

Without seeing the connector I can't say for absolute sure but it wouldn't surprise me if you were right in that the top case's flat cable is damaged/faulty. They are fairly easy to damage the first few times you do the repair if you don't take care to disconnect it before lifting the top case up too far.

Technically it "could" be the connection on the logic board, where the top case connects, but out of a 1000+ MacBook repairs I've only seen this occur one or twice. A new top case (iFixit calls them upper cases) is much more likely the culprit, replacing that should get you back up and running. (also, as a heads up, when replying to an answer you want to do so as a comment, rather than as a new answer)

의 답변

의견 추가하세요
가장 유용한 답변

More than likely the top case connection isn't seated properly. I would disassemble it again and make sure to push this connection in until it feels solid. It's a bit awkward to do the first few times so I wouldn't doubt that it might be loose if you haven't removed the top case a few times.

Step 12 in this guide shows the cable I speak of.

Block Image

Before re-assembling the Mac I would try to power it on, just to make sure it works before you reinstall all of the screws.

해당 답변은 도움이 되었습니까?

점수 3
의견 추가하세요

귀하의 답변을 추가하십시오

Joao Conttroller 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 262