기기를 수리하세요 커뮤니티 상점

3MB 공유 L3 캐시 2.6 GHz 듀얼-코어 Intel Core i5 프로세서 (Turbo Boost 최대 3.2 GHz). 2013년 2월 13일에 출시되었습니다.

120 질문 전체 보기
질문 마감됨

옵션

Where are the power pads on this early 2013 MacBook Pro Model?

Since this Macbook Pro model is so new, I cannot find any pictures/information on where the power pads on the Model A1425 (early 2013) Macbook Pro logic board... Any help (especially with pictures) would be greatly appreciated!

Thanks!

UPDATED: Here are the photos of my logic board that I added below in my post. If someone could point out the two specific locations where a short is needed to power my MacBook on, it would be a godsend!!

Block Image

Block Image

Block Image

Update

I don't know where the keyboard connector is on the logic board. Do you have a photo? I don't have the exact configuration shown in the link you gave me on my logic board.

ADDED: Photos are from my MacBook's logic board below. If anyone can point out where I need to short to power my MacBook on, it would be greatly appreciated. Thank you!

Block Image

Block Image

Block Image

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 2개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

John, just like machead3 mentioned, this can cause damage. Anyhow you need to shorten pin 5 (keyboard on/off) to ground. On the connector ground is pin 29 but you can use the metal standoffs since they are easier to touch and locate. Hope this helps, good luck.

Block Image

해당 답변은 도움이 되었습니까?

예 아니요
점수 5

댓글 5개:

How do you shorten the pin ?

의

I use a jumper lead (a wire with clips at the ends) which is holding a sewing pin as its probe on one end to touch the solder pad as needed and the other in this case a metal frame stand off.

의

If you are also working on an A1425 retina, you're asking the wrong question because this machine turns itself on automatically when you attach a functioning charger. The charger is your power button! If you plug the charger in and it does not instantly turn on - something is wrong. Start by unplugging everything besides the dc in board and the fan, now plug the charger in. What happens?

What's on PPBUS_G3H? PP3V42_G3H? PP5V_S4? What led up to it not turning on?

의

If someome knows what is PPBUS_G3H, they won't be asking the question.

의

Ok, you fix their motherboard then. Have fun.

의

댓글 달기

옵션

See this Answer. Be aware that force starting a machine can cause damage.

If this answer is acceptable please remember to return and mark it.

해당 답변은 도움이 되었습니까?

예 아니요
점수 1
댓글 달기
조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 4

전체 시간: 9,347