Fifth generation of iPhone. Repair of this device is straightforward, and requires screwdrivers, prying tools, and patience. GSM/CDMA / 16, 32, or 64 GB / Black or White.

2971 질문 전체 보기

Silent/lock button causes intermittent vibrate

Hi all,

Odd one; keeping the Silent/lock button in the off position seems normal. Once the button is switched to silent/lock mode it activates and displays the transparent logo with a line through it, meaning the mode is active, thats normal too. However, intermittently the logo will show again with a vibration showing its now off, and then again with a vibration to show its on again, this continues at random intervals and sometimes multiple vibrations and logo flickers.

Anyone had this before? - I've checked the vibration module but not the headphone jack flex assembly yet, just want to make sure I'm not missing something before I open up.

Quick bullet point summary:

• Vibrate/silent switch intermittently vibrates and displays silent logo once switched on.

• Vibrate/silent switch physical movements seem solid.

• All other buttons work OK.

• Headphones working OK.

Thanks!

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 2
의견 추가하세요
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

3개의 답변

선택된 해법

It sounds as if the flex cable as went a tab faulty a new flex should sort out your problem that's the first step in the trouble shoot..

Oh you could also just restore to rule out corrupt software

해당 답변은 도움이 되었습니까?

점수 1

댓글:

thanks con, thought so, will tear down and check connections, rebuild. If no good ill replace the flex. :)

의 답변

No probs if changing the flex doesn't work your probobly dealing with a motherboard issue.

의 답변

의견 추가하세요

Will, Can you give me information about did changing flex cable solve the problem or not? If not what did you do to solve problem? Thanks.

해당 답변은 도움이 되었습니까?

점수 0

댓글:

Sorry, yes - I had changed the flex cable and ensured the vibrator motor was seated correctly touching the contacts (and that no other dust/elements where making contact with them)

All seems ok now, thank you!

의 답변

의견 추가하세요

Hi, I have the same problem. This flex calbe I have to change, could you tell me what that is?

Thanks

해당 답변은 도움이 되었습니까?

점수 0

댓글:

The volume button ribbon cable which has the the vibrate / silent switch connected to it as well.

의 답변

의견 추가하세요

귀하의 답변을 추가하십시오

Will 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 1

지난 7일: 16

지난 30일: 59

전체 시간: 4,946