주요 콘텐츠로 건너뛰기

4세대 iPhone. 수리는 간단하지만 앞면 유리와 LCD를 하나의 유닛으로 교체해야 합니다. GSM / 8, 16 또는 32GB 용량 / Model A1332 / 검정 또는 흰색.

2375 질문 전체 보기

Changed screen on my iPhone 4, now it wont charge.

I changed a screen on a iphone 4. And now it wont charge. I have checked the flex cabel to make sure its properly fited, i even tried to change the dock connector. I have also tried with another battery. Any ideas? I am not feeling good about this, because i did this repair for a friend...

EDIT:

I have now tested the phone with a motherboard forom another iphone 4, and now it charges fine. So i guess its a problem with the motherboard? What should i do now... Any suggestions?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 -1
댓글 달기

답변 2개

가장 유용한 답변

Check all connections and clean it make sure that everything is not damaged or burned then unplug everything and put it all back together and put it on the charger maybe that can solve the issue. Hope this helps.

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기

It's possible you damaged componants on the board. Did u pry the battery off against the board?

해당 답변은 도움이 되었습니까?

점수 0

댓글 12개:

I pryed it up from the battery side. So the spudger was laying on to the battery when i pryed it.

Did u pry on the volume lets side or logic board side?

It's also possible that when unclipping the dock connector a componant was knocked off also.. Can you inspect for damage?

Here is a picture of the connector: http://imgur.com/pRqjczv

I have inspected the connector and everything looks fine. Sorry for bad quality picture, I will upload some better ones tomorrow. I pryed the connector up from the volume bar side. Thank you so much for helping.

I doesn't seem damaged to me. What do you think con?

Here is another picture: http://imgur.com/Cca9HXN

댓글 7개 더보기

댓글 달기

귀하의 답변을 추가하세요

Iver 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 477