주요 콘텐츠로 건너뛰기

모델 A1278, 2012년 6월 출시. Turbo Boost가있는 Intel 프로세서, 최대 512 MB DDR5 비디오 RAM

1622 질문 전체 보기

no backlight after water damage.

Hello.

You're doing great job here!

I would like if you could help me too.

I have Macbook A1278 with 820-3115-B motherboard after water damage.

There is no backlight of screen (flashlight trick works) and keyboard. I check voltage :

I2C_BKL_1_SCL 3,3V at R9753

I2C_BKL_1_SDA 3,3V at R9757

LCD_BKLT_PWM 3,3V at R9704

PP3V3_S0_BKL_VDDIO 3,3V at C9711

PPBUS_SW_BKL 12,4V at C9712

PP5V_S0_BKL 5V at C9710 and C9714

PPBUS_S0_LCDBKLT_FUSED 12,4V at F9700 and on out Q9706

PP3V3_S0_LCD 3,3V at R9008 and R9009

PP3V3_LCDVDD_SW 3,3V at L9004

PPVOUT_SW_LCDBKLT 12,4V at C9020

PPBUS_SW_LCDBKLT_PWD 12,4V at R0910 and then 3,06V at R9715

and there it 0V at BKL_ISEN1,..,BKL_ISEN6, so this is mean that U9701 need to be replace?

Albo Magsafe works 1 on 5-10 tries. I have to plug it slowly and then there is green light and it starts (no battery inside).

Please help me with backlight and connector.

Thanks in advance.

PS: Sorry for my english

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 -1

댓글 1개:

Did you check Q9707 to see if the backlight gets enabled?

댓글 달기

답변 1개

Usually, the backlight fuse always gets blown. Replacing F9700 ought to do the trick. There should be roughly 10-12.4V on both sides of the fuse if it's working properly. If it was blown, you'll get no voltage on one side of it. Thus, the backlight will not activate.

The fuse looks something like this image.

In terms of the MagSafe problem, I would just clean everything up with denatured alcohol. Make sure everything's clean and there isn't any gunk between the contacts.

해당 답변은 도움이 되었습니까?

점수 0

댓글 2개:

There is 12.4v on fuse and it's doesn't blow. I'll try clean connector better. Thanks for will to help.

I've clean it but this doesn't help.

댓글 달기

귀하의 답변을 추가하세요

etypecie 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 1,023