평판: 1
1
2
On my LCD screen the black shows up as red, when I connect it to an external monitor it shows up fine though.
I ordered a 1900x1200 replacement in hopes of getting a repair and upgrade done at the same time but the problem is still persistent.
I'm working if ordering a new LCD cable or new Inverter would be my best bet. Any ideas?
좋은 질문 입니까?
평판: 2.9k
17
18
5
I would suggest to change inverter. i dont know much about macs, screens in particular, but i would bet a faulty inverter.
해당 답변은 도움이 되었습니까?
+ Ralph
평판: 20.3k
68
33
18
This does not look like a bad inverter, you were right to order a new display.
해당 답변은 도움이 되었습니까?
I guess, he have said, the screen was changed. thats why i have suggested inverter...
Oh sorry I misread your question, you say the problem has persisted. I thought you were saying that it was persisting after you had ordered it, but you had not received it yet. My bad.
In which case yes, that would point to an inverter. Any chance of a loose cable would be eliminated by a successful installation of a display.
24 시간 전: 0
7일 전: 0
30일 전: 0
전체 시간: 3,313
댓글 2개
Thanks for the replies. New inverter it is. By the way the 1900x1200 resolution is amazing. I wished I new about the upgrade sooner.
Juan Estrella 의
It wasn't the inverter, it turned out to be the Logic board. Since the computer was so old, I purchased a new one. So I never found a fix, I'm a assuming since I replaced all the display parts and reinstall the OS it must be something on the logic board.
Juan Estrella 의