주요 콘텐츠로 건너뛰기

Model A1059 or A1099 / 20, 40, or 60 GB hard drive / touch sensitive click wheel

227 질문 전체 보기

Is it the logic board?

computer or itunes does not recognize ipod.

works ok otherwise. when connected to computer i get the do not disconnect symbol, then turns back to ipod menu. is it the logic board or ipod connector that goes to the usb?

thks Debe'

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 -1
댓글 달기

답변 3개

가장 유용한 답변

If other USB devices (Flash Drive etc.) work in the same USB port then you can rule out your computer as the problem. It is most likely a faulty cable. If you have another cable or a friends cable, you could try that and see if you can rule out the cable. otherwise it will be the ipod.

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기

I have the same issue. The cable works with another iPod & other USB devices work in the same USB port. What part of the iPod is the problem? Is there a way to narrow it down? I ran the diagnostics and everything seemed to check out (hard drive, USB port, etc.)

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

Take a look at the plug on the ipod that the cable plugs into I had the same prob on a 5th gin vid I fixed the plug on the ipod and that fixed it

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

debefireall 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 1,327