기기를 수리하세요 커뮤니티 상점

A 10.1 inch Samsung tablet computer with a 1.4 GHz processor, 1280x800 pixel LCD, and 149 ppi multi-touch display. The model number of the device is GT-N8013ZW. Released August 2012, repair of this device is straightforward.

127 질문 전체 보기
질문 마감됨

옵션

What exactly does the digitizer do?

Would the digitizer cause the screen to lock up and restart?

My GT-N8013 is' I believe soft-bricked. I've attempted to restore it and I've come to the conclusion that there could be a hardware issue. It constantly re-boots , It'll start and allow me to have 10-30 Seconds of useability until it locks up and automatically re starts in a continuous loop.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된

옵션

The digitiser picks up where you put your finger on the screen, so if only the digitiser is broken you wont be able to do anything with the screen but you should be able to see the screen (unless the LCD is broken). Also it wont make you device restart. I think your device is in a boot loop.

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 217