주요 콘텐츠로 건너뛰기

Repair and disassembly guides for Kenmore Microwaves.

182 질문 전체 보기

turns on when door is open

working fine one minute, then after I'd removed food, it turned ON when I opened the door. Will not work with the door closed. Unplugged, pressed "stop", "clear", tried everything. But continues to work backward. (On when open, OFF when closed). It's less than 2 years old!

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 2
댓글 1개

kathy, did this happen all of a sudden or was there any previous repair involved?

댓글 달기

답변 3개

가장 유용한 답변

I had the same problem, What I had to do is go to options and change everything to off and then put them back to what you want Exp: sound to off and then put it back to on ect. I did this and now it works fine.

해당 답변은 도움이 되었습니까?

점수 2
댓글 달기

This thing is very dangerous, especially if you have any children in the house. This sounds like a control board issue but the risks involved in repairing it are not worth it. These things are cheap, trash it before it harms someone and get a new one.

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기

This fault is cheap repaire if you try

Check relay on the control board, mostly the contacts on the relay are carbonised and get attached together so when the oven shakes like you open the door the contact is present in the relay and the microwave starts.

Its best you replace the relay.

Next you need to check the three door latch switches open one by one and service them.

Any enquiries contact

Ashwin

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

kathy 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 11

30일 전: 41

전체 시간: 10,452