What type of screws does the DualShock 4 use?

Question

DualShock 4 CUH-ZCT1

PS4 Controller model CUH-ZCT1. Released in November 2013 by Sony Computer Entertainment, this six-axis, 3.7 V lithium ion battery controller is uncomplicated to repair. (NOTE: Teardown guide is NOT for this model)

387 질문 전체 보기

Gary @gary22463

평판: 49

3

1

게시일: 2014년 7월 31일

옵션

What type of screws does the DualShock 4 use?

I was replacing my thumb sticks when i noticed 2 of the screws are rusted and one of them got stripped.

My question is what are the demotions of the screws and where can i buy them?

thanks for the help.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 4

댓글 달기

답변 5개

oldturkey03 @oldturkey03 평판: 781.5k 1.1k 893 2.3k · Answer 1 · 2014-08-01T18:46:49-07:00

가장 유용한 답변

oldturkey03 @oldturkey03

평판: 781.5k

1.1k

893

2.3k

게시일: 2014년 8월 1일

옵션

Gary, the screws are actually M2X6 Phillips flat head machine screws. The 6mm is a reference to the length of the screw, M2 is metric 2mm thread. Something like this should work. Hope this helps, good luck.

해당 답변은 도움이 되었습니까?

예 아니요

점수 6

댓글 1개:

Thank you very much. I'll try them my only concern is that the screws have a cone shaped head and the DualShock 4 screws are completely flat,Guess I'll find out if they work.

Gary 의 2014년 8월 1일

댓글 달기

james @james30242 평판: 2.2k 20 9 11 · Answer 2 · 2014-08-01T03:10:22-07:00

james @james30242

평판: 2.2k

20

9

11

게시일: 2014년 8월 1일

옵션

Hey mate, the DualShock 4 uses, 6.0 mm phillips #00 screws.

해당 답변은 도움이 되었습니까?

예 아니요

점수 2

댓글 4개:

ok thanks but i cant seem to find any that would work on the DualShock 4 any ideas where i can get them?

Gary 의 2014년 8월 1일

if i understand correctly 6.0mm is the length of the screw then what is the diameter? any screws that i do find are the cone shaped flat heads.

Gary 의 2014년 8월 1일

Um, I've had a look around and sadly I can't find 6.0 mm phillips #00 screws anywhere, I can only locate DualShock 3 screws as of the moment and they are 7.2 mm phillips #0 screws. My only other idea is if you tried a hobby/electronics shop.

james 의 2014년 8월 1일

I know there hard to find, I'll have a look around if i find them maybe i'll sell them on ebay for those still looking. I wanted to find them online to make it easier to share with others, thank you for spending the time to look.

Gary 의 2014년 8월 1일

댓글 달기

Parker @parker90629 평판: 13 1 · Answer 3 · 2017-06-08T13:15:54-07:00

Parker @parker90629

평판: 13

1

게시일: 2017년 6월 8일

옵션

My best measurements indicate the diameter of the screws are 76 mil and the thread pitch is 40TPI.

I've read from multiple sources that M2 by 6mm (metric) screws work well, as the fitting it is being threaded into is plastic, I'd imagine it is quite flexible. I've ordered stainless M2 screws myself to give it a go. Unfortunately I can't find anything that even resembles these screws from any standard.

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 달기